Name: VersaCut™ Guide Bar, 20"
SKU: 208VXLHD009

Shop Retailers Find a Local Dealer

Quick Links:

Specifications, Details & Support Fit Guide & Parts Cross Reference Reviews

Strong, lightweight guide bar designed to perform in a wide range of professional applications.

Product Details

More precise cutting from a stiffer bar
Provides better balance on smaller saws
Lighter weight means less fatigue
Longer nose life and better performance with a new sprocket nose system
Reduced rail wear and more precise cutting via better chain fitup
Pitch: 3/8", Gauge: .058", chain drive link count: 72
Fits Husqvarna and others, for additional fit information please see the part finder.
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Specifications, Details & Support

Guide Bar
Product Family	VersaCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/8"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.058"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	72.0
Bar Length	50.0 cm
Tail Mount	D009
Guide Bar Code	VXL
Guard Mate Compatible	No
Intenz	No
Narrow Kerf	No
Bar Nose Radius	Large
Sprocket Nose Tooth Count	12.0

General
Color	Medium Grey
Volume	64.13 in³
Product UOM	Each
Weight (with Packaging)	2.16 Lb
Net Weight Carton	21.6 Lb

Light-Weight Professional Guide Bars

Model Fit Guide and Parts Cross Reference

Need Help? Contact Customer Service at 800-223-5168 or email us at oregon.support@oregontool.com

Fit Guide

1100
160
162
181
185
2100
2100XP
2101
2101XP
254
254XP/XPG
260
266
266XP
268
268XP
272
272XP/XPG
281
281XP
285
288
288XP
298
298XP
3120
3120XP
362 XP
362 XPG
362XPG
365
365 XP
371
371XP/XPG
372XP/XPG
380
385XP
390XP
390XPG
394
394XP/XPG
395
395 XP
395XP/XPG
455
465 RANCHER
480
545
555
560XP/XPG
562XP/XPG
565
570 XP
572 XP
575 XP
576XP/XPG
585
592 XP
61
65
66
70
77

Product Details

Fit Guide

Husqvarna

Jonsered

Makita

McCulloch

Oleo Mac

SOLO by AL-KO

Shindaiwa

Replacement Guide

Alpina

Dolmar

Husqvarna

Jonsered

Makita

Partner