Name: Single Rivet Guide Bar, 8"
SKU: 084MLEA041

Find a Local Dealer

Quick Links:

Specifications, Details & Support Model Fit Guide Reviews

A BETTER SAW STARTS HERE® The lightweight, easy to maneuver guide bar for occasional woodcutters using small electric and gasoline powered chain saws.

Product Details

Designed to pair with Oregon® 90 series narrow kerf chain
Reversible for longer life
Better control, less kickback
Pitch: 3/8" low profile, Gauge: .043", chain drive link count: 33
Fits Craftsman, Homelite, Poulan and others, for additional fit information please see the part finder.
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Specifications, Details & Support

Guide Bar
Product Family	Standard
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/8" Low Profile™
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.043"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	33.0
Bar Length	20.0 cm
Tail Mount	A041
Guide Bar Code	MLE
Guard Mate Compatible	No
Intenz	No
Narrow Kerf	Yes
Bar Nose Radius	Small
Sprocket Nose Tooth Count	7.0

General
Color	Medium Grey
Volume	14.66 in³
Product UOM	Each
Weight (with Packaging)	0.23 kg
Net Weight Carton	4.409 Lb

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at oregon.support@oregontool.com

Product Details

Fit Guide

Bosch

Craftsman

Einhell

Gardol

Greenworks

Güde

Jonsered

Makita

Oregon

Poulan

Remington

Ryobi

Texas

Troy-Bilt

Worx